CPT 13/60

Concrete Pump Truck

CPT 13/60 H

  • Open hydraulic circuit with hydraulic oil cooler
  • Storage bins with hinged lockable doors
  • Emergency Stop Switch
  • Fully enclosed waterproof controls,
  • splitter gearbox for hydraulic pumps
  • Hardened and chrominum plated cylinders
  • Split spectacle plate and non-reducing S-Valve
  • Conveying pipeline dia. 100 mm - 150 mm attachable,
  • 10 x 3 m pipe, 2 x 6 m hose, bends, seals,
  • couplings (dia 125 mm)
  • RCP 13/60 H

    Performance Graph



    Technical Data

    Pump Cell RCP 13/60 H

    Watertank capacity l

    600

    Water pressure bar

    20

    Options

  • Top mounted additional pipe rack
  • Wireless or cable remote control
  • Special painting
  • Conveying pipeline 100 mm + 150 mm
  • Separate engine drive
          –   Deutz F 6 L 913 84 kW / 114 hp
          –   Deutz BF 6 L 913 112 kW / 152 hp
  • Automatic lubrication system
  • Hopper vibrator
  • Suggested truck 2 axle GVW 12 tons, 210 hp
  • Other models available upon request
  •  

    Technical Description

     

    Mounting

    The concrete pump unit is mounted into a base frame in stable steel construction.Easily accessible operator’s stand with clear fittings at the side. Single axle chassis in rigid design, towable up to 20 km/h at the construction site. Pneumatic tires.

     

    Drive and Capacity Regulation

    Diesel (optional electric) engine with directly flanged hydraulic pump for concrete pump actuation.The regulation of the concrete capacity is conducted through a hydraulic valve located at the operator’s stand. This valve changes the transporting capacity of the hydraulic pump and therefore the output of the concrete pump. The flow can be varied infinitely. The valve is easily accessible.

     

    Control

    The switching over of working and swing pipe cylinders is conducted through the reliable hydraulic sequence control in the main control block of the concrete pump. The pump is fully hydraulic, so that it may be worked under any circumstances.

     

    S-Valve-System

    The „floating“ S-Valve guides the concrete through a short, highly developed swing pipe directly from the conveying cylinder into the concrete conveying pipeline. This design is also lessening concrete deformation, pressure loss and wear on the line. It is designed without a reduction allowing optimal concrete flow and avoiding clogging.The S-Valve tube is composed of a highly wear-resistant steel casting. Continuous automated wear adjustment and an automatic centralised lubrication system in the S-Valve gasket insure long service life for the bearing and sealing surfaces.Wear and tear parts, e. g. spectacle plate and wear ring, can easily be exchanged.

     

    Conveying Cylinders and Water Box

    Conveying cylinders are made of hardened steel with inner walls thickly chromium-plated. Conveying pistons of special rubber are vulcanised to a steel core. The water box is for pressureless rinsing of cylinders and for changing the conveying pistons. It is easily and safely accessible.

     

    Concrete Hopper

    The concrete hopper with agitator guarantees easy concrete movement to the middle of the cylinder openings. The optimal supply situation ensures a high filling level of the conveying cylinder even when pumping harsh and stiff concrete mixes.

     

    Water Pump

    For flushing of conveyor pipeline with pressurised water and for cleaning the concrete pump a hydraulically driven water pump is fitted on the water tank.

     

    Standard delivery schedule

    Concrete conveying unit as described including:

    • Hydraulic oil filling
    • One-colour Enamel finish in RAL
    • Water pump (20 bar) with high-pressure hose and spray nozzle
    * Technical data are subject to change without prior notice.
    We welcome everyone to our new web-page
    and are looking forward to your feed-back. Please contact us anytime at info@reichag.com [more...]